|
Long Handle
Dippers |
Polyethylene dipper for removing
samples from large tanks. Beaker has two pour spouts and gradations. |
|
Whirl-Pak Bags |
Sterilized sampling bags with locking latch to prevent leaking.
EPA approved for potable water collection. |
|
Sludge Judge |
Take
accurate readings on settled solids in a variety of liquids, to any
depth. Ideal for sewage treatment plants, chemical plants, food
processing facilities. |
|
Sludge Judge II |
The
larger cousin of the Sludge Judge it is made of 1-1/4" plastic pipe
for larger sampling sizes and greater strength. |
|
Sludge Judge Ultra |
Another member of the Sludge Judge series this sampler is
constructed of
extremely strong 3/4" polycarbonate for maximum strength
and rigidity. |
|
Sludge Nabber |
Aluminum pole extends from 4' to
6.5'. Ideally suited for numerous sampling requirements. |
|
Swing Sampler |
Enables user to collect samples
from a horizontal flowing stream (i.e. Sewer). The end of the
sampler swings allowing collection from different angles, including
90°. |
|
Tank Sampler |
Enables you to take a sample at a
specific depth. Comes in two 5 foot sections of 3/4" plastic pipe
with screw fittings. |
|
Water Sampler |
A one-liter sampler of clear acrylic
furnished with a 20 meter calibrated line and a lead collar which
assures rapid descent and minimal drift. |
|
Groundwater Sampler |
Take quick samples of liquids in
recovery wells, storage tanks, leach ate monitoring wells. A
bailer-type sampler, it collects liquids at any depth over three
inches. |
|
DO Sewage Sampler |
The Dissolved Oxygen Sewage Sampler
collects two simultaneous samples in accordance with APHA
specifications. A bucket-type sampler, it's perfect for manual
spot-sampling of water or wastewater at depths up to five feet. |
|
Polypro Water Sampler |
Designed for water sampling and BOD
testing applications. Polypropylene construction allows accurate
sampling for trace metals. |
|
Disposable
Bailers |
Eliminates cross contamination while
meeting requirements of quality assurance programs. Rated for VOC Sampling. |
|
Bailer Suspension Cord |
Coated stainless steel with
end caps. Can be cut easily to desired lengths with wire
cutters. |
|
Wheaton Grab
Samplers |
Ideal for sub surface
sampling. Excellent for access to fluid flow in deep manholes and
hard-to-reach sub surface sampling areas. |