SharkBite 2XL Couplings

2XL Straight Coupling 2XL Reducing Coupling 2XL Slip Coupling

SharkBite 2XL (commercial) is an extensive range of fitting and ball valves available in sizes ranging from 1-1/4" to 2". The SharkBite 2XL is compatible with copper, PEX, or CPVC pipe and is certified for use in commercial and residential applications for potable water, hydronic heating, chilled water and general water distribution for irrigation.

No tools, solder, clamps, unions or glue required. Cut pipe square, de-burr, mark the pipe and push to get a pressure ready connection every time! Disconnect in seconds with the De-Mount Tool. These fittings have been designed to be installed or removed by one person. All fittings are lubricated for easy connection. No waiting for copper tube to dry before soldering or glue to cure, SharkBite makes an instant connection. It is as easy as Cut-Push-Done.

There is little waste with the SharkBite fittings system. Should you make an error or simply want to change your installation, just remove the fitting and re-use. The fittings used for repeated testing must not be used in any permanent application. The fittings are factory assembled and components cannot be removed.

When repairing or tapping into existing pipe with "Push Fittings" you must be able to either move the fittting or the pipe to ensure the pipe is engaged fully into the fitting. With rigid pipe like copper the only way is to have a SLIP feature to allow easy installation when tapping into existing pipe. .




QTY 4397588

SB0135 1-1/4" Coupling

QTY 4397590

SB0141 1-1/2" Coupling

QTY 4397593

SB0154 2" Coupling

QTY 4397598

SB013528 1-1/4" x 1" Reducing Coupling

QTY 4397586

SB014135 1-1/2" x 1-1/4" Reducing Coupling

QTY 4397626

SB015441 2" x 1-1/2" Reducing Coupling
SLIP COUPLINGS (slip end only suitable for copper and CPVC)

QTY 4397612

SB0635 1-1/4" Slip Coupling

QTY 4397614

SB0641 1-1/2" Slip Coupling

QTY 4397616

SB0654 2" Slip Coupling