The compact ABM Miniprobe ultrasonic
level transmitters allow simple and reliable
non-contact level measurement of
liquids in chemical day tanks, drums or other containers. The
microprocessor-controlled circuit generates a pulse that is transmitted
from the transducer face. This pulse is reflected back from
the surface of the liquid. The "round trip" transit time is then
converted into the current output, which is directly proportional
to the fluid level.
The simple push button calibration may be done after installation
or bench calibrated with a suitable target. Red, yellow and green
LED indicator lights signal calibration settings and operation status.
Choose from standard model or relay-equipped model that triggers
on high level.
Use with any SCADA or process controller, or remote display.