ABM Radar Level Transmitter

  • Best for applications with foam or vapor
  • Not affected by wind or condensation
  • Easy installation and programming
  • Self-adjusting "smart" processing

The ABM Radar sensors accuractely and reliably measure a wide range of media in a broad range of process conditions. From calm product surfaces and water-based media to turbulent surfaces and aggressive hydrocarbon media.

ABM "smart" radar signal processing monitors conditions in any environment and automatically adjusts its trasnmit energy and receiver gain to detect only one echo from measured materials.

The 4-20 mA, loop powered, 2-wire output connects to virtually all process displays, controlelrs and PLCs, and can be equipped with optional HART 7 communications.

Power:   20-35 VDC
Output:   4-20 mA, 2-wire (HART 7 optional)
Conduit Entry:   1/2" NPT
Housing:   Aluminum (stainless steel optional)
Dielectric Rod:   Polypropylene (PTFE or SS Optional)
Operating Temperature:   -40 to 140 F (Transducer and Electronics)
Pressure:   15 PSIG max.
Resolution:   Range model dependent
Accuracy:   +/- 0.25% of max range
Frequency:   5.8 GHz or 6.3 GHz
Enclosure:   NEMA 6, IP68
Mounting   1-1/2" NPTM, (2" Optional)
Approvals:   FCC Part 15, CE



QTY ABM200017

17' Range, 0.08" Resolution

QTY ABM200033

33' Range, 0.15" Resolution

QTY ABM200050

50' Range, 0.22" Resolution

QTY ABM200100

100' Range, 0.44" Resolution
Minimum range begins at the tip of the antenna rod.