To monitor the progress of your dechlorination run, we suggest that you test at the end of the discharge hose (preferred). Periodic checks should be made to insure that dechlorination is occurring, and also to allow the operator to adjust the inducted neutralizing chemical to insure that excess neutralizer is not being used. For Testing Kits please visit our Lab Section.

The Pollard BCI 260-I Model In-Line Dechlorinator works great for both Potable and Superchlorinated (New Water Main Installations) from 1 to 250 ppm Chlorine/Chloramines. The 260 flows up to 300 gpm and can use either CAPTOR^TM NSF or Vita-D-Chlor^TM NSF Granular to dechlorinate.

The BCI Chemical Injector allows for easy adjustment of inducted non-corrosive chemicals.

Chemical injection into the fluid stream is controlled with a micro adjustable control knob with incremental markings. The device will deliver from 0 gph to 90 gph of chemical neutralizer. The control knob range is closed to 5 full turns to maximum delivery setting, with incremental markings on each rotation.

The Pollard BCI 260-I is supplied with Cam Lock connection couplings and chemical induction tubing, to allow quick and easy hook-up to commercial/domestic water supplies. The Pollard BCI 260-I is short and more compact. See notes below for 2.5" NST hydrant connections and hose and diffuser kits.

 For higher volumes of water see Model 1500

PURCHASE IN-LINE DECHLORINATORS