|
Four ways to locate metallic pipe with the 150RT
Where direct connection to a metallic pipe or other conductor is available, direct connect to the pipe from the transmitter using the provided cables.
If you can not direct connect to your conductor, you may use either a coupling clamp to induce a signal or induce a signal directly onto the target line by placing the transmitter over the pipe.
Conductor
type determines receiver and transmitter: Metallic, Cable, or Plastic
Metallic Pipe purchase the 83 kHz Receiver and 83 kHz Transmitter.
Cable and Tracer Wire purchase the 30kHz Receiver and a 30 kHz transmitter
Plastic Pipe purchase the 640 Hz Receiver and Beacon (Sonde) to send the signal through the ground to your 150 Receiver. |
