Selecting a PULSAtron KOP Repair Kit
All KOPkit model numbers begin with the letter K. The remainder
of the number can be determined by knowing your pump model.
When you select your KOPkit, you will need to build the model
number based on the pump model number you purchased.
The two pieces of information required are head size and wet-end
code, which is part of the pump model number.
The pump head size is the fourth digit in the pump model number.
The 2 represents your pump head size.
These 4 characters represent your wet end code.
The four digits in the wet-end code represent the Head Material,
Seats & O-Rings, Ball Material and Connection
Using the above example, the code breaks down as follows:
P - Head Material, including fittings.
In this example, the P represents GFPPL.
T - Seat & O-Ring Material.
In this example, the T represents Teflon.
C - Types of Balls used in the valves.
In this example, the C represents Ceramic.
1 - Connection type.
In this example, the 1 represents tubing connections for 3/8" OD
The completed KOPkit number for above example is: K2PTC1