The Pitotless Nozzle®

 
 
 
   
Tired of rocks damaging your pitot?

The new Pitotless Nozzle® from Hose Monster® is the perfect solution for safe, accurate, and dependable flow testing. The Pitotless Nozzle® is designed for taking precision flow rate measurements without a pitot. You'll never have to shut down in the middle of a test to change out a pitot because it got hit by a rock. 

   

The Pitotless Nozzle must be attached securely to a hydrant or other stationary device, because the thrust created by high velocity water flow is dangerous to personnel and destructive to property.

DO NOT attach the Pitotless Nozzle directly on the end of an unsecured hose. Clear the water discharge path.

  • No hand-held Pitot needed
  • No more Pitot replacements
  • Read flows from 48 GPM to 1607 GPM
  • Four sizes – 1", 1 1/8", 1 ¾", 2"
  • FM Approved for Flow Rate Accuracy
  • Constant-rate-of-area-reduction
    means no Gauge Needle bounce

Click here for Instruction Sheet.
 

Attach Pitotless Nozzle
directly to the hydrant
or use with Hose Monster®


Designed for use with
Little Hose Monster
or the Hose Monster.
 

NOTE: If you use the Pitotless Nozzle without a Hose Monster, it must be attached securely to a hydrant or another stationary device. The thrust created by high-velocity water flow is dangerous to personnel and destructive to property, so be sure to clear a path for water discharge. Do NOT attach the Pitotless Nozzle directly to the end of an unsecured hose without a Hose Monster. A nozzle extension or stream shaper may be required if flow-rate is excessive.

The nozzle is offered in four threaded sizes, and four grooved sizes to accommodate a wide range of Flow Rates, and you will select the size based on the range you will be measuring.

 
FLOW CHARTS | T=Threaded G=Grooved
1" T 1" G 1-1/8" T 1-1/8" G 1-3/4" T 1-3/4" G 2" T 2" G
 
PITOTLESS NOZZLE FOR THE LITTLE HOSE MONSTER | GROOVED
ITEM NUMBER DESCRIPTION PRICE
     

QTY HMPN2GRV

Pitotless Nozzle, Little Hose Monster, 2" Size
$552.00

QTY HMPN175GRV

Pitotless Nozzle, Little Hose Monster, 1-3/4" Size
$579.50

QTY HMPN1125GRV

Pitotless Nozzle, Little Hose Monster, 1-1/8" Size
$579.50

QTY HMPN1GRV

Pitotless Nozzle, Little Hose Monster,1" Size
$549.00
CSA, BCT, AMA and other thread forms are available.
PITOTLESS NOZZLE FOR THE HOSE MONSTER | THREADED

QTY HMPN2THD

Pitotless Nozzle, Hose Monster, 2 " Size
$555.00

QTY HMPN175THD

Pitotless Nozzle, Hose Monster, 1-3/4" Size
$583.00

QTY HMPN1125THD

Pitotless Nozzle, Hose Monster, 1-1/8" Size
$582.75

QTY HMPN1THD

Pitotless Nozzle, Hose Monster, 1" Size
$0.00
CSA, BCT, AMA and other thread forms are available.
PURCHASE HOSE MONSTER FLOW GAUGES

Includes 1/4" Tee, 1/4" Male Plug, 1/4" Female Coupler, 1/4" Nipple, 1/4" Drain

QTY HMGK60D4

Gauge Kit 4", 60psi, 1/2% Accuracy

$175.00

QTY HMGK100D4

Gauge Kit 4", 100psi, 1/2% Accuracy

$175.00

PURCHASE HOSE MONSTER PRESSURE GAUGES

Includes 1/4" Tee, 1/4" Male Plug, 1/4" Female Coupler, 1/4" Nipple, 1/4" Drain

QTY HMGK160D4

Gauge Kit 4", 160psi, 1/2% Accuracy

$175.00

QTY HMGK200D4

Gauge Kit 4", 200psi, 1/2% Accuracy

$175.00

QTY HMGK300D4

Gauge Kit 4", 300psi, 1/2% Accuracy

$175.00

QTY HMGCCN

Hose Monster Gauge Cert and Calibration for New Hose Monster Gauge, NIST

$25.00

PITOTLESS NOZZLE ACCESSORIES
           
REDUCER
HMAD425NST
  REDUCER
HMAD4525NST
  WRENCH
HWSPA101
  WRENCH
HWSPA104
  GATE VALVE
P67596
   
PURCHASE ACCESSORIES FOR PITOTLESS NOZZLE

QTY HMAD425NST

4" FNST x 2-1/2" MNST Reducer
$90.95

QTY HMAD4525NST

4-1/2" FNST x 2-1/2" MNST Reducer
$113.55

QTY HWSPA101

Universal Spanner Wrench *
$19.00

QTY HWSPA104

Hole-Type Wrench and Spanner *
$19.00

QTY P67596

2-1/2" Hydrant Swivel Gate Valve

$359.00

* Two spanner wrenches are needed to tighten or loosen the Pitotless Nozzle. A universal spanner wrench (WSPA101) used for hose connections and a special hole-type spanner wrench (WSPA104) used as a holdback on the body of the Pitotless Nozzle.