|
Hanna Copper
Colorimeters |
|
 |
-
Custom-built microprocessor converts photoelectric generate mV's
into units of copper and displays them on a clear LCD
-
Auto shut-off after 10 minutes of non-use
-
300 tests with only one battery
-
Self-diagnostic and error messages
-
HR = High
Range
|
| |
|
Copper is found in effluents and
natural water both as suspended solids and salt. A high concentration is
toxic for plants and animals, which accounts for it rigorous monitoring
by the authorities and in industry. Lower concentrations are often
employed to contain the growth of plankton and algae. |
|
Each meter includes 2 cuvets, caps, 9V alkaline battery and instruction
manual.
Reagents for these meters must be ordered
separately.
|
|
|
PRODUCT
SPECIFICATIONS
| Meter: |
L1105206 (Copper HR) |
| Range: |
0.00 to 5.0
mg/L |
| Resolution: |
0.01 mg/L |
| Accuracy
(@20°C/68°F) |
±0.02 mg/L
±4% of reading |
| Typical EMC
Deviation: |
±0.01 mg/L |
| Light Source |
Light Emitting Diode @ 555 nm |
| Light Life |
Life of the instrument |
| Light Detector |
Silicon Photocell |
| Battery Type/Life |
1 x 9V / Approximately 40 hours of continuous use. Auto-shut off after
10 minutes of non-use |
| Dimensions / Weight |
180 x 83 x 46mm (7.1 x 3.3 x 1.8") / 290g
(10 oz.) |
| Method |
Adaptation of the DPA approved method. Reaction between copper and
bicinchoninate reagent causes a purple tint in sample. |
|
| |
|
PURCHASE COLORIMETERS
|
|
ITEM NUMBER |
DESCRIPTION |
PRICE |
|
|
Copper (HR)
Colorimeter |
|
|
|
Copper (HR)
Reagent, 100 Tests |
|
|
|
Replacement
Cuvets, 4 pack |
|
|
|
Replacement
Cuvet Caps, 4 pack |
|
|
