Line Items: 0
Total Items: 0
Sub Total: $0.00

CURRENT SHOPPING
CART STATUS

▪▪
Applicable Tax and Freight Charge will be added to Final Invoice.

Hanna Fluoride Colorimeter
  • Technological alternative to chemical test kits
  • SPADNS method
  • Auto shut-off after 10 minutes of non-use
  • Self-diagnostic and error messages
  • Lab grade accuracy and fast response
  • 300 tests with only one battery
  • Reagents must be ordered separately
  • Colorimeter is supplied with 2 cuvets, battery and manual


LHI93729 Fluoride Meter Manual

 


Fluoride is best known for its properties in preventing tooth decay. Water authorities often add Fluoride to drinking water to maintain approximately a 1.0 mg/L concentration. Fluoride can be found naturally in ground water, particularly if a reservoir is in the proximity of draws of sea water. While Fluoride does help to prevent tooth decay, too little can be ineffective and too much can cause staining.

PURCHASE COLORIMETERS

ORDER NUMBER DESCRIPTION PRICE

QTY LHI93729

Hanna Fluoride Colorimeter
$202.00

QTY LHI9372901

Fluoride Reagent, 100 Tests
$19.90

QTY LHI93729C

Fluoride Colorimeter Kit complete with case and reagents
$338.00

QTY LHI710009

Blue Rubber Protective Boot
$34.00

QTY LHI731321

Replacement Cuvets, 4 pack
$19.00

QTY LHI731325

Replacement Cuvet Caps, 4 pack
$10.00

FLUORIDE COLORIMETER SPECIFICATIONS

Range:

0.00 to 2.00 mg/L

Resolution:

0.01 mg/L

Accuracy (@20°C/68°F)

±5% of reading or ±3% of reading

Typical EMC Deviation:

±0.01 mg/L

Light Source

Light Emitting Diode @ 585 nm

Light Life

Life of the instrument

Light Detector

Silicon Photocell

Battery Type/Life

1 x 9V / Approximately 40 hours of continuous use

Dimensions / Weight

180 x 83 x 46mm (7.1 x 3.3 x 1.8") / 290g (10 oz.)

Method

Adaptation of the SPADNS method. Reaction between fluoride and reagent causes a red tint in the sample.