Monarch Track-It™
Analog Input Data Recorders

The Track-It™ DC Voltage and Current Data Loggers are two channel, battery powered, stand alone, compact data loggers that record up to 32,000 samples each of DC Voltage or Current data. Units are available in 4 DC voltage ranges or for DC current. The unit is easily configured using the included Track-It™ Software. Simply plug the logger into an open USB port on your PC and the software automatically identifies the logger. Configure the unit to start and stop recording at a pre-determined time and date or only when an alarm condition is sensed. The sample storage rate can be set from 1 sample every 2 seconds to 1 sample every 24 hours. The on board data storage is non-volatile so data will not be lost in the event of a depleted battery.

The Track-It™ DC voltage and current loggers can also be used to record ambient temperature if one or neither input is being used. Information displayed on the LCD is also user programmable and can be sequenced by pressing the logger button. A multicolored LED indicator notifies the user of alarms, or general activity.

  • Sample Rates: Up to 64,000, 2 sec to 24 hour
  • Temperature Range: -20° to 85° C / -4° to 185° F
  • Temp Accuracy: ±1°C 0° to 50°C/32° to 122°F; ±2°C -20° to 85°C/-4° to 185°F
  • Power: Lithium CR2032
  • Battery Life: Up to 1 yr @ 1 min. sample rate
  • Operating Temperature: -4° to 185° F
  • Dimensions: 4.06" L x 0.66" W



QTY MN20001

4-20 mA, 1 Year Battery

QTY MN20002

500 mV DC, 1 Year Battery

QTY MN20003

1 VDC, 1 Year Battery

QTY MN20004

5 VDC, 1 Year Battery

QTY MN20005

10 VDC, 1 Year Battery

QTY MN20011

4-20 mA, 5 Year Battery

QTY MN20012

500 mV DC, 5 Year Battery

QTY MN20013

1 VDC, 5 Year Battery

QTY MN20014

5 VDC, 5 Year Battery

QTY MN20015

10 VDC, 5 Year Battery

QTY MN10100

Extra Track-It™ Software

QTY MN10102

Replacement USB Cable