The Track-It™ AC Event Data Logger is a battery powered, stand along, compact date logger that records up to 64,000 on/off cycles. Use the Track-It™ AC Event Logger to monitor cycle patterns of pums, blowers and other electrical equipment powered by 120 or 240 Vac. The unit is easily configured using the included Track-It™ Software. Simply plug the logger into an open USB port on your PC and the software automatically identifies the logger. Configure the unit to start and stop recording at a predetermined time and date or only when an alarm condition is sensed. The sample storage rate can be set from 1 sample every 2 seconds to 1 sample every 24 hours or can be set to stare a sample at every event. The on board data storage is non-volatile so data will not be lost in the event of a depleted battery.
The Track-It™ AC Event Loggers can also be used to record ambient temperature along with on/off cycles. This can help diagnose heat vs. cycle time issures. Information displayed on the LCD is also user programmable and can be sequenced by pressing the logger button. A multicolored LED indicator notifies the user of alarms, or general activity.