 |
 |
Line Items: 0
Total Items: 0
Sub Total: $0.00 |
|
CURRENT
SHOPPING
CART STATUS
▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪
Applicable Tax and Freight Charge will be added to Final Invoice.
|
|
|
|
|
|
Eutech pH 200 pH / ORP Controller |
|
|
This economical on/off controller is
a best buy for batch applications! |
 |
- 2
set point, 2 SPDT relay for on/off control
- Toggle between pH (or mV) and temperature
display
- Reliable power supply
from 85 to 250 V AC/DC withstands voltage fluctuations
- 2 separately
adjustable hysteresis bands
- Selectable
symmetrical mode operation eliminates electrical noise
- 2 point pH
calibration; offset ORP & Temp. calibration
- 4-20 mA output for
remote monitoring or hard copy recording
- 2 level password
protection for calibration and set up parameters
- Removable terminal
strips offer quick & easy connections
- Battery back-up of memory maintains
set-up if power fails
- pH/ORP Electrodes
- Calibration
Solutions
|
pH 200 Controller Manual |
pH 200 Controller Brochure |
|
pH 200 CONTROLLER OVERVIEW
 |
|
This sturdy, compact
controller withstands voltage fluctuations from 85 to 250V AC/DC! It is
ideal for installation were electrical fluctuations are common, or install
it in series throughout areas of differing electrical conditions.
Advanced setup mode lets
you set relay values, select pH or ORP control, select manual or automatic
temperature compensation, and more. It also lets you view electrode slope
and offset, and previous calibration points.
The 1/8 DIN housing is
ready to install in standard panels and NEMA rated boxes. Includes mounting
hardware; accepts electrodes with BNC connectors and 100 Pt RTD ATC elements
NEMA 12 Enclosures
Protect your controller -- both indoors and outdoors. These
enclosures are nonmetallic with clear polycarbonate cover. Each includes
mounting plate and hardware for installation (compression fittings not
included) |
|
|
Measures: |
pH |
mV |
Temperature |
| Range: |
0.0 to 14.0 pH |
±1000 mV |
-10.0 to 110°C |
|
Resolution: |
0.1 pH |
1 mV |
0.1°C |
| Accuracy: |
±0.1 pH |
±2.0 mV |
±1°C |
|
Calibration: |
up to 2 points (1.68, 4.0, 7.0, 9.00, 0.0,
12.45) |
offset up to ±150 mV |
offset up to ±0.5°C |
| Control: |
on/off |
| Number
of inputs: |
one |
| Number of
set points: |
two (high and low) |
| Separate
alarm relay: |
No |
| Output
Control: |
2 SPDT non-powered relays, 6A at 110 VAC, 250 VAC maximum |
| Output
Current: |
Isolated 4-20 mA |
|
Hysteresis: |
Adjustable to 0.02 pH to 2.0 pH or 0 mV to 300 mV |
|
Temperature Sensor: |
2 or 3 wire 100Ω pt RTD |
|
Temperature Compensation: |
automatic or manual, from 0 to 100°C |
| Password
Protection: |
2
Level (Calibration & Set up Parameters) |
| Display: |
Scrolling 14-Segment LED, 4 digits |
| Operating
Temperature: |
0 to 50°C |
| Housing: |
1/8 DIN |
|
Dimensions: |
1.9" x 3.8" x 6" (4.8 x 9.6 x 1.5 cm) |
| Shipping
Weight: |
3 lb |
|
|
|
PURCHASE pH 200 CONTROLLER
|
|
ITEM
NUMBER |
DESCRIPTION |
PRICE |
|
|
pH 200 Controller, includes mounting hardware and
terminal blocks |
|
|
|
Power Cord
3 ft. with bare leads, 3 prong US plug, 110VAC |
|
|
|
NEMA 12 Electrical Enclosure
with one 1/8 DIN cutout |
|
|
|
|
;)
