Solinst 102 Water Level Indicator

• Narrow weighted probe

• Low cost

• Strong flexible cable

• Non-slip easy-to-read markings
   

• Solinst Model 101 Water Level Meter

The Solinst Model 102 Water Level Meter uses a P1 1/4" Stainless Steel or heavier 3/8" P2 Brass probe on strong flexible coaxial cable, which will not stick easily to sides of wells.  The P2 is the standard supplied probe.  There is no price difference between the 2 probes.  The cable is engraved with 1/100th inch markings. The well balanced free-standing reel has an easy-access drawer for the 9V battery, a light and buzzer, sensitivity switch, battery test button and an excellent brake. For highest accuracy readings see the Solinst Model 101 Water Level Meter

The Model 102 Water Level Meter uses a 9V battery and a small diameter probe on narrow coaxial cable.  When the probe enters water the electrical circuit is completed, sending a signal back to the reel where a light and clearly audible buzzer are activated.   The water level is then determined by taking a reading off the cable at the top of the borehole, casing or tube and by accounting for the distance from the point of measurement to the nearest marking on the cable