Aqua Stop Curb Stop Replacement Tool

Change leaking or defective Curb Stops under pressure!

• For 3/4" Curb Stops complete with Iron Pipe
  Thread (IPS) Outlet and Flare Type Copper
  Tube (CTS) Outlet
• You can use Pollard's P64602 Adapter Kit
  for 1" Full Port (round port only) Curb Valves
• Flare the Service Line under pressure with
  the Hollow Hammer Kit and the Aqua Stop

• Hollow Hammer Kit
• Parts Breakdown

HOLLOW HAMMER

Lets you replace old or leaky curb stops under full pressure with only one hole to dig and no water or mud build up...in just six easy steps:

HOW TO USE THE AQUA STOP

CLICK FOR ENLARGEMENT

Step 1: Insert the Aqua Stop in the outlet side
of the curb stop.

Step 2: Push the plunger through the open curb
stop. Turn the hand wheel on the Aqua-Stop,
and all flow through the line is stopped.

Step 3: Remove the body of the Aqua-Stop.

Step 4: Remove the curb stop. The Aqua-Stop
will hold the full line pressure as long as necessary.

Step 5: Replace the curb stop, replace the
Aqua-Stop body, turn the hand wheel and
withdraw the plunger.

Step 6: Turn off the new curb stop, remove
the Aqua-Stop and the job is complete.