PIPEHORN 800 OVERVIEW
This locator offers the same superior high frequency (480 kHz)
performance you have come to expect with a Pipehorn. Pipehorn is
the best tool when direct connect is not possible, and on the toughest
conductors such as coated iron pipes with insulated joints, un-energized
power (street/parking lot lights), worn out tracer tape and wire, short
side services and stub-outs, concentric neutrals and fiber.
Nothing sweeps areas for un-marked utilities like a Pipehorn.
With this model you will enjoy
simultaneous conductive transmission of both high (480 kHz) and low (9
kHz) frequencies for congested areas and for long distance locates
(800-HL). Check either signal with the flick of a switch.
There will be no more air broadcast on high frequency conduction.
Better signals on the worst conductors. A fast-response signal
strength meter and sharp audio tone for precise pinpointing.
This unit is more durable than ever.
It boasts a watertight reinforced receiver wand. Also an
all-weather, high-impact ABS housing on the transmitter. Audio
tone indicates battery strength and good connection. Low profile
so it won't tip over. Bright yellow color. Lightweight and
space saving in a carrying bag.