PL-1500 HIGH & LOW PIPE & CABLE LOCATOR

Padded Carrying Case for all components and accessories
 
Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge
Direct Connection Cables 12v Battery Cables & Clamps (Optional) 8.125 kHz Sonde (for LOW only, Optional) Inductive Clamp (Optional) Ground Stake
 
The PL-1500 LOW Transmitter has 3.0 watts power output in the Direct Connection Mode, allowing locates for longer distances. Use the Inductive Mode to quickly locate shorter pipes and cables.

The PL-1500 Receivers are very light-weight, weighing only 3.5 lb, with large, easy to read LCDs and thumb-controlled switches.

The single vertical bar (line) in the receiver displays above is the "Peak Hold" feature. The Peak Hold shows the maximum signal measured in the last 3 seconds.
 
Press the PL-1500 Receiver's "DEPTH" switch, and the depth is displayed (down to 16 ft deep).   The PL-1500 Transmitters show the actual, measured Output Current in the Direct Connection Mode. If the Output Current is low, then increase the Output Power Level or move the Ground Stake.
Press the Depth Switch again, and the "Crossing" To measure the depth of the method for measuring depth is activated:
Move the receiver to the side of the pipe or cable until the "o" appears. The line's depth is twice the distance from here to the point over the top of the line.
   
Specifications
PL-1500 Manual

PURCHASE PL-1500 LOCATORS


ITEM NUMBER DESCRIPTION PRICE

QTY PL1500L

PL-1500 LOW Transmitter and Receiver
$2450.25

QTY PL1500H

PL-1500 HIGH Transmitter and Receiver
$3440.25

QTY PL2000CLAMP

Inductive Clamp
$306.50

QTY PL2000DRUM

Conductive Drum and Cable, 50'
$420.75

QTY PLBATCABLE

12 VDC Battery Cable
$74.25

QTY PL2000SONDE

8.125 kHz Sonde
$465.30