PL-2000 Pipe and Cable Locator

• 3 Active Frequencies

• 2 Passive Frequencies

• 4 Modes of Operation

• Inductive & Direct Connection Capabilities

• Easy to Use

• Cost Effective

The PL-2000 Pipe and Cable Locator offers a new approach in high power, low frequency locating.  With three active frequencies, two passive frequencies, four modes of operation, and both inductive and direct connection capabilities, the PL-2000 is powerful and versatile, but still surprisingly easy to use and cost effective

FEATURES

• Transmitter offers three watts power output in the Direct Connection operating mode; allowing locates for much longer distances than the typical .5 watts found in other transmitters

• The lightweight, balanced receiver, offers four different operating modes

  • "Peak" mode, for the most accurate locates and for depth measurement

  • "Null" mode, for fast, easy tracking

  • "Dist" mode, for even longer distances

  • "Sonde" mode, for locating sewer Sondes and measuring their depths

• Three "active" frequencies at a nominal 512 Hz, 8kHz, and 27 kHz, plus two "passive" frequencies at the 50/60 cycle flowing AC current, and Radio in the 14 kHz - 25 kHz ranges

• Select the "Mix" mode at the transmitter and transmit all active frequencies simultaneously

• Detects and reports "poor ground" conductivity at the transmitter in Direct Connection

• Current measurement in the "Depth" function indicates if the measured depths are correct for congested utilities

• "Auto Off" functions in both the transmitter & receiver shut off their operations after a set time period of non-use if they are accidentally left "on."

Optional Equipment

• Direct signal clamp

• Sonde (mini-transmitter)

• Car battery connection cable

• Aircraft grade headset

PURCHASE PL-2000 LOCATORS