Power-Flo PFSE Submersible Sewage Pump
 

PUMP OVERVIEW


The Power-Flo PFSE series is a heavy-duty submersible non-clog sewage pump designed for raw sewage applications. These pumps are ideal for municipal and industrial lift stations.

These pumps are built for continuous operation with oil filled, thermally protected (1ph only) motors. All Power-Flo pumps are powder coated for corrosion resistance.

The impeller is an open 2 vane cast iron designed for 2-1/2" solids.

Upper and lower ball bearings are oil lubricated and keep the shaft in alignment for longer life. Units are standard with 25' of power cord. Models are available in 1-1/2, 2 and 3 hp in either single or three phase motors. All models are manual and do not come with floats.

 
Pump Submersible Sewage
Materials Cast iron case and volute, Buna-N Elastomers
Shaft Seal Silicon/Carbide Mechanical in oil bath
Impeller 2 Vane cast iron, 2-1/2" solids
Maximum Liquid Temperature 104 degrees
Motor Oil filled, 1750 RPM, thermally protected (1 ph only)
 

PURCHASE PUMP


ITEM NUMBER DESCRIPTION PRICE
SINGLE PHASE PUMP

QTY XPFSE1524

1-1/2 HP, 230 Volt, 12.6 Amp, 25' Cord
$1806.95

QTY XPFSE2024

2 HP, 230 Volt, 14.5 Amp, 25' Cord
$1905.95

QTY XPFSE3024

3 HP, 230 Volt, 28.1 Amp, 25' Cord
$1995.95
THREE PHASE PUMP

QTY XPFSE1594

1-1/2 HP, 208/230 Volt, 8.8/8 Amp, 25' Cord
$1717.95

QTY XPFSE1544

1-1/2 HP, 460 Volt, 4 Amp, 25' Cord
$1717.95

QTY XPFSE2094

2 HP, 208/230 Volt, 15.4/14 Amp, 25' Cord
$1905.95

QTY XPFSE2044

2 HP, 460 Volt, 7 Amp, 25' Cord
$1905.95

QTY XPFSE3094

3 HP, 230 Volt, 19.2 Amp, 25' Cord
$1955.95

QTY XPFSE3044

3 HP, 460 Volt, 9 Amp, 25' Cord
$1955.95