• Depth Adjustable Sensors
• EX101 fits and 1 1/2" pipe fitting and adjusts to pipe sizes 3-10"
• EX201 adjsuts to pipe sizes 10-48"
• Meter extends about 1/8 of pipe diameter, minimizing potential for clogging with debris
• Accept SeaMetrics modules to provide indication, 4-20 mA, logging and flow switching
• Available in brass or 316 stainless steel
• The flow range is 0.2 to 20 ft/sec
• The conductance of the water must be a minimum of 20 microsiemens

The complete lack of moving parts of this insertion flow sensor is the source of its reliability. There is no rotor to stop turning in dirty water and there are no bearings to wear out. A rapidly reversing magnetic field is produced in the lower housing, and as the fluid moves through this field a voltage is generated. This tiny voltage is measured and translated into a frequency signal which is proportional to flow rate. This square wave signal can be sent directly to a PLC or other control, or can be converted using any of the SeaMetrics family of indicators and converters.

PURCHASE MAGMETERS