|
IP101/IP102 Paddle Wheel Insertion Flow Meter (for large pipe) |
|
 |
- Hall Effect
Sensor pulse output 12vdc to power.
- 0.3 to 30.0 fps
/ Accuracy ± 1-1.2% FS
- 1.5" NPT
connection to pipe with adjustable depth made on the sensor
- Fastened to the
pipe with weldolet fitting or saddle.
- IP101 to 10"
pipe / IP201 above 10"
|
 |
 |
| |
|
FLOW METERS OVERVIEW
 |
|
Ruby bearings and a
non-drag pick-off give these adjustable insertion flow sensors the
widest flow range of any of the paddlewheel types. A sensor detects the
passage of miniature magnets in the six rotor blades. The resulting
square-wave signal can be sent for hundreds of feet without a
transmitter, over unshielded cable. This signal can be connected
directly to many PLC’s and other controls without any additional
electronics.
Installation fittings
are standard 1-1/2" or 2" NPT. A depth adjustment system allows two
basic sizes to cover pipe sizes from 1-1/2" to 48". |
| |
|
FLOW METER SPECIFICATIONS
|
| Sensor |
Hall Effect
Sensor |
12 VDC current
sinking pulse |
| Materials |
Sensor Body |
Brass, 316
Stainless Steel or PVC |
| |
Rotor |
PVDF |
| |
Shaft |
Nickel-bound
tungsten carbide (zirconia ceramic optional) |
| |
Bearings |
Ruby Jewels |
| Pipe Size |
IP101 |
2 to 10" (50 to
250 mm) |
| |
IP201 |
10 to 48" (250
to 1200 mm) |
| Fitting Size |
PVC |
2" NPT |
| |
Brass, 316 SS |
1 1/2" NPT |
| Maximum Pressure |
PVC |
130 degrees F @
0 psi (55 degrees C) |
| |
Brass, 316 SS |
200 degrees F
(93 degrees C) |
| Range |
0.3
to 30 FPS (0.1 to 9 M/s) |
| Accuracy |
±1
to 1/2% FS |
| Insertion Force |
0.44 x pressure in pipe |
| Nominal K-Factor |
11
Hz/FPS (3.6 Hz/M/s) |
| Power |
5-24 VDC 1.5 mA |
| Cable |
#22
AWG 3-con, 18' |
| Max Cable Run |
2,000' (650 m) |
|
| |
|
PURCHASE FLOW METERS
|
|
ITEM
NUMBER |
DESCRIPTION |
PRICE |
|
|
PVC Body for
2"-10" Pipe - 2"
NPT fitting |
|
|
|
Brass Body for 2"-10" Pipe -
1.5" NPT fitting |
|
|
|
316SS Body for 2"-10" Pipe -
1.5" NPT fitting |
|
|
|
PVC Body for
10"-48" Pipe -
2" NPT fitting |
|
|
|
Brass Body for
10"-48" Pipe -
1.5" NPT fitting |
|
|
|
316SS Body for
10"-48" Pipe -
1.5" NPT fitting |
|
|
