Designed for use as a meter accessory, the PD10 divider is used primarily for pacing electronic metering pumps. It comes in two different housings, an enclosure which can be mounted near the pump and a round watertight housing for mounting on the meter. Any number from one to 999 can be set on rotary switches. Each time the divider has received the set number of pulses from the meter, it puts out one pulse to stroke the pump. When used with an M-series meter, this allows changes to the pulse rate, for example, to adjust to seasonal changes. Mounted on an IP insertion meter or a WT turbine, the PD10 creates a programmable pulse meter. Besides metering pumps, this combination can also be used with a PT34 or PT35 pulse timer, for boiler or cooling tower feed and/or bleed.

Power for the PD10 can be supplied by the metering pump if the pump has a sensor power supply. This is the case with LMI externally-paced metering pumps. Some other pumps require an external power supply, which is available from SeaMetrics. Connectors available as standard items are the LMI and SeaMetrics connectors.

DIVIDER SPECIFICATIONS AND FEATURES

• Manufactured standard with LMI connectors (Pulsafeeder and Relay outputs available)

• Allows instant modification of pulse rate from water meter

• Makes small pulse rate adjustments possible

• Pre-wired with appropriate pump connector

• Works with M-Series Pulse Meters

• Can be ordered pre-mounted on an 80-series flow sensor
   

• Wall Pump Enclosure: Epoxy encapsulated ABS housing with cover

• Meter Enclosure: Cast Aluminum sealed housing

• Temperature Range: 30 to 130 degrees F (0-55 degrees C)

• Divider: 1 to 999

• Setting: Rotary Switches

• Power: 6 to 18 VDC

• Maximum Load: 20 mA at 24 VDC

• Maximum Frequency: 350 Hz (pulses/second)

• Output: Open collector transistor / 100 mS duration

• Input Connection: Wall - Seametrics Connector, Meter - Terminal

• Output Connection: Wall - Pump connector on 24" lead, Meter - Pump connector on 18' lead

PURCHASE DIVIDERS