Line Items: 0
Total Items: 0
Sub Total: $0.00

CURRENT SHOPPING
CART STATUS

▪▪
Applicable Tax and Freight Charge will be added to Final Invoice.

Telog Hydrant Pressure Recorder

HPR21Action.jpg (8694 bytes)
  • Installs on 2½" nozzle or 1/4" NPT
  • Environmentally rugged
  • 5 year battery life
  • Stores 80,000 data values
  • Windows software support
  • Easy data collection
  • Security cover available
HPR21_2 sil.jpg (6848 bytes)


Telog’s Hydrant Pressure Recorder, the HPR-31, monitors water pressure within any water distribution system. The HPR-31 replaces costly, high maintenance chart recorders in applications such as pressure complaints, valve performance, model validations, water hammers and negative pressure investigations.

The simplicity of the compact, battery-powered HPR-31 enables you to put it to work within minutes of unpacking. The HPR-31 attaches onto the 2.5 inch hose nozzle outlet of a common fire hydrant. The rugged enclosure is low profile and an optional security cover is available.

Once installed, the HPR-31 measures water pressure at user programmable rates up to four samples per second with its internal pressure transducer. You can determine how often such data is summarized for reporting. The recorder computes any combination of minimum, average and maximum pressure measurement at each interval according to your selection of statistics and recording intervals.

Recorded data may be gathered via an RS-232 connector using a hand-held Palm DTU (Data Transfer Unit) or a laptop. The DTU is especially convenient for gathering data from several hydrant pressure recorders. At times when on-site data evaluation is required, a laptop and Teloggers for Windows software, is all you need.

For units with Diffuser kits, click here

 

PRODUCT SPECIFICATIONS

Input

Type

Strain gauge, isolated pressure sensor

Range (psi)

100 200 300

Over Pressure (psi)

300 600 600

Burst Pressure (psi)

850 1000 1000

Resolution

0.025% of full scale, 12-bit

Accuracy

+0.2% of full scale at constant temperature

Temperature Effect

+0.01% of full scale per ºC

Recording

Sample rate

Programmable from 4/sec up to 8 hours

Data interval

Programmable from 1/sec up to 8 hours

Values saved

Selectable min, avg. & max per interval

Memory

128 Kbytes (~80,000 data values)

Interface

Type

RS-232; 300 to 19.2 Kbaud

Connector

Circular 4 pin watertight

Battery

Type

Single AA Lithium (Saft LS 14500 C or equal)

Life

5 years typical

Support Software

S-3PCTeloggers for Windows

S-3PCL Teloggers for Windows Lite

Data Transfer Unit

Palm Pilot with Telog support software

Environmental and Mechanical

Temperature

Operating

 -40° to 65° C

Storage

 -10° to 65°

Humidity

0-100% relative humidity

Enclosure

NEMA 4x /IEC IP65

Size

12.70 cm diameter x 8.89 cm or 5" diameter x 3.5"

Thread*

Hydrant mount: 2.50" NHT Standard

Internal mount: 1/4 NPT

Computer Requirements

For S-3 PC or S-3PCL IBM compatible computer with a 586/133 MHz or higher processor running on Microsoft Windows 95/98/NT/2000, at least 32 MB of RAM, a hard disk with at least 200 MB of free space and a pointing device.

 

PURCHASE PRESSURE RECORDERS

ITEM NUMBER DESCRIPTION PRICE

QTY HPR-31-100

Hydrant Pressure Recorder 100 psi
$895.00

QTY HPR-31-200

Hydrant Pressure Recorder 200 psi
$895.00

QTY A-203 DTU

Data Transfer Unit for Downloading Data
$0.00

QTY S-3PCL/C-21ATC

HPR Software & Cable
$0.00

QTY S-3PCL

HPR Lite1 Software & Cable
$149.85

QTY A-HSC

Security Cover with Keys 
$44.95

QTY C-21ATC

Computer Interface Cable Only 
$52.50
1 - Call PollardWater.com for details.