|
The OP210 Ortho-Phosphate analyzer is ideal for
controlling Ferric Chloride Feed at wastewater facilities.
Ortho-Phosphate is easier to use than Total Phosphorus and requires far
less maintenance.
Colorimetric method is repeatable and stable. 3
Measuring Ranges are available 0.05 to 3.00 mg/l, 0.1 to 10 mg/l, and
0.1 to 25 mg/l. Response time is 4 min to measured value.
System Comes
with Analyzer and Analysis Module. For sampling from activated sludge
basins or raw or primary effluents the Filtration system is recommended.
Purchase Separately. |
