Patterson Circulator Pumps
 
  • Cast Iron Construction, or
  • Lead-Free Bronze Construction
  • Replaces B&G, Taco, Armstrong
    and Dayton with No Modification
  • NEMA 56J motor needs no special
    couplings like other brands


Click for Pump Curve


Click for Product Manual
  SPECIFICATIONS
Pump   Inline Centrifugal Circulator
Materials   Cast Iron or Lead-Free Bronze
Shaft Seal   Buna-N Mechanical and
Casing O-Ring
Impeller   Stainless Steel or Lead-Free
Bronze
Motor   1/4 HP, 1725 RPM, 115V, with
Overload Protection
PATTERSON INLINE CIRCULATION PUMPS

The Patterson inline circulator pumps were designed to be a drop in replacement for the most popular existing brands on the market. They were designed to be installed in new or existing applications where Bell & Gossett, Dayton and other brands are specified.

They are built for continuous operation with a standard ¼ hp, 56J ODP motor a SS motor shaft and Buna-N seals and "O" rings. Capable of flows to 55 gpm and heads to 19' (8 psi). The Patterson inline circulator pumps are the best choice for replacing your existing pump. They are a newer more modern design then the B&G and other popular brands, they feature SS impellers, and there is no special coupling like that found on the old designs.

The motor can be replaced with an off the shelf motor and there is no need for removing the pump to accomplish the task. The 4 bolt flange design allows mounting in any of four different positions. The pumps are available with Cast iron or lead free bronze body and your choice of SS or lead free bronze impeller.

All units are equipped with a single phase, 115 volt ODP motors; amp draw at full load is 5.4. Mounting flange kits are sold separately and are available in NPT pipe sizes ¾", 1", 1-1/4", 1-1/2" and 2" sizes.

All flange kits include 2 flanges, 2 Buna-N gaskets and 4 Nuts and bolts for a complete kit. Flange kits are available in cast iron or bronze and are designed to fit specific models so be sure to choose the right kit for your application.

Click for Pump Dimensions
 

PURCHASE PATTERSON INLINE CIRCULATION PUMPS

ITEM NUMBER DESCRIPTION PRICE
CAST IRON MODELS

QTY XAM569095

SS Impeller, 25 lbs.
(see 569 curve)
$213.57

QTY XAM570095

SS Impeller, 28 lbs.
(see 570 curve)
$232.93

QTY XAM571095

SS Impeller, 28 lbs.
(see 571 curve)
$254.35

QTY XAM572095

Lead-Free Bronze Impeller, 28 lbs.
(see 572 curve)
$324.85
LEAD FREE SILICON BRONZE MODELS

QTY XAM569097

SS Impeller, 25 lbs.
(see 569 curve)
$335.91

QTY XAM570097

SS Impeller, 28 lbs.
(see 570 curve)
$389.82

QTY XAM571097

SS Impeller, 28 lbs.
(see 571 curve)
$413.32

QTY XAM572097

Lead-Free Bronze Impeller, 28 lbs.
(see 572 curve)
$486.59

PURCHASE PATTERSON INLINE CIRCULATION PUMP FLANGE KITS

ITEM NUMBER DESCRIPTION PRICE
5690 SERIES

QTY XAMC56990

3/4" Cast Iron
$17.23

QTY XAMC56991

1" Cast Iron
$17.23

QTY XAMC56992

1-1/4" Cast Iron
$17.23

QTY XAMC56993

3/4" Bronze
$35.25

QTY XAMC56994

1" Bronze
$35.25

QTY XAMC56995

1-1/4" Bronze
$35.25
5700 / 5710 SERIES

QTY XAMC57090

3/4" Cast Iron
$18.80

QTY XAMC57091

1" Cast Iron
$18.80

QTY XAMC57092

1-1/4" Cast Iron
$18.80

QTY XAMC57093

1-1/2" Cast Iron
$18.80

QTY XAMC57094

3/4" Bronze
$45.43

QTY XAMC57095

1" Bronze
$45.43

QTY XAMC57096

1-1/4" Bronze
$45.43

QTY XAMC57097

1-1/2" Bronze
$70.50
5720 SERIES

QTY XAMC57098

2" Cast Iron
$32.12

QTY XAMC57099

2" Bronze
$90.08