Zenner Compound Meters
pit inside

Zenner Compound Water Meter Flow Ranges

 
COMPOUND WATER METER OVERVIEW
Bronze compound meters utilize a turbine type meter on the main flow line and a proportionately sized meter on the low flow/bypass line. A change over valve controls the flow of water through the appropriate measuring device. Before the valve opens, all water flows through the low flow meter. As pressure rises the valve opens, allowing water to flow through both meters.
 

Movement of the measuring elements are transmitted to drive magnets, which transmit the motion to driven magnets located within hermetically sealed registers. The magnets are connected to gear trains, which translate the rotations into volume totalization displayed on the register dial faces.

Compound meters consist of a main case, turbine measuring element, changeover valve housing, main case cover, multi-jet type meter, and magnetically driven register assemblies. The main case, changeover housing and bypass meter are cast in bronze. The measuring element assembly includes the rotor assembly, vertical shaft and a calibration vane which eliminates the need for calibration change gears.

These meters are engineered and manufactured to provide longterm service and operate virtually maintenance free. If necessary the universal measuring element (UME) can be removed from the main case for maintenance. Interchangeability of certain parts between like sized meters minimizes spare parts inventory.

It is recommended to use of a separate strainer upstream from the turbine meter. Strainers reduce the chance of damage to the rotor as well as the frequency in which it must be removed for inspection. The lack of a strainer may void the warranty of the turbine meter. Note that trainers are sold separately.

   
  • Captures Flow across very Wide Range
  • High Accuracy maintained at Crossover
  • Universal Measuring Element
  • Meets AWWA Standard C702
  • Meets NSF/ANSI 61-G Lead Free

PURCHASE COMPOUND WATER METERS


ITEM NUMBER DESCRIPTION PRICE

QTY ZEC2100

Compound Direct Read Meter
2"x 5/8" x 17" Lay Length, US Gallons
$2022.75

QTY ZEC2101

Compound Direct Read Meter
2"x 5/8" x 17" Lay Length, Cubic Feet
$2022.75

QTY ZEC3100

Compound Direct Read Meter
3"x 3/4" x 17" Lay Length, US Gallons
$2621.50

QTY ZEC3101

Compound Direct Read Meter
3"x 3/4" x 17" Lay Length, Cubic Feet
$2621.50

QTY ZEC4100

Compound Direct Read Meter
4"x 3/4" x 20" Lay Length, US Gallons
$3457.25

QTY ZEC4101

Compound Direct Read Meter
4"x 3/4" x 20" Lay Length, Cubic Feet
$3457.25

QTY ZEC6100

Compound Direct Read Meter
6"x 1-1/2" x 24" Lay Length, US Gallons
$6146.00

QTY ZEC6101

Compound Direct Read Meter
6"x 1-1/2" x 24" Lay Length, Cubic Feet
$6146.00