Product Details

• Continuous fiberglass duct rodder with a copper wire embedded in the rod core to enable tracing
• Attach standard field transmitter to Duct Hunter™ to locate to depths up to 10'
• Trace sewer laterals to confirm no cross bore has occurred
• Copper wire inside fiberglass core is energized with an electromagnetic signal that is detectable above ground through the use of hand held signal receiver
• Attach sonde, roller guide or pulling eye to rod’s end ferrule
• Rod is marked every 5' to help locate where head is
• Minimum bend radius of 1.75"
• Pull strength: 150 lb
• Recommended conduit: 1/2" to 1"
• Accessory kit included contains: Roller Guide, End Ferrule, Splice Ferrule, 2 Adhesive, 2 Emery Cloth, Heat Shrink Tubing, Canvas Pouch